Build Fire Pit Yourself
Building a backyard fire pit of your own will certainly add a charm to your place. Imagine days of camping outside in the lawn with your kids on a cool evening near the fireplace. Or perhaps the idea of a barbeque next to the fireplace during the winters sounds appealing? So if you want to learn how to build a backyard pit there are a few instructions you can follow easily. Before building a fire pit ensure that you prepare the selected area that surrounds the pit with layers of decomposed pavers, concrete and granite for an inflammable surface.
A sophisticated fire pit in the backyard can include a number of features like gas lines and in-built seating to add a dramatic punch! It is an inexpensive method to build a pit on your own than hiring a professional. You should start with digging a pit that takes roughly around eight hours. Add in cemented covers and retaining walls. While picking a significant spot for the pit, ensure that you look for a flattened area which measures around 10-12 feet in diameter.
1. Course concrete sand (1 cubic yard)
2. Retaining wall units
3. Concrete Adhesive
6. Tape measure
7. Handheld tamp
10. Safety gloves
11. Wet saw
12. Plate compactor
Procedure – How to Build a Backyard Fire Pit
1. Cut a part of the string which should have a length similar to the radius of the fire pit. Tie one end of the string to a stake that is kept at the center of the fire pit. The other end of the string is connected to an upside down can. Using paint, draw a circle to identify the boundary of the pit. Dig out the dirt and debris present within the marked circle. Ensure that the pit is around 18 inches deep.
2. Gravel must be poured within the pit at a height of six inches. Make sure that you the base is smooth by pouring the gravel after every layer inside. Once you’ve raked the topmost layer, tamp it down. You can spread a thin layer of sand atop the granite layer.
3. Mark an inner radius within the fire pit which functions as an efficient guide for placing retaining walls. After you’ve placed the first row retaining walls within the inner circle, secure the units into the gravel using a mallet. Ensure that the retaining wall units are at equal levels.
4. The second row of retaining walls can comprise of a groove at the bottom and a ridge that stands at the end. This easily interlocks the retaining wall units together. Once the units are clean you can stick each unit together using concrete adhesive. The pavers added to the fire pit consist of 4-6 inch of a gravel base.
5. The pavers can be laid in suitable pattern which depends upon the kind of style you’re looking for. You can lay the pavers in a staggered layout or arrange the bricks against one another. In order to get a smooth edge you can always purchase pavers from a store. Aluminum or plastic edge restraint keeps the pavers from moving.
6. Using a plate compactor, the surface of the paver remains compact therefore being highly necessary. The pavers around the pit are usually tapped to remove the sharp corners for a less uniform look.
Article Source: http://EzineArticles.com/8660879